TSG2 WHOLE VACUUM TRANSFER HIGH SPEED PRINTER SLOTTER DIE CUTTER MACHINE
Description
The whole process of vacuum suction design,full version printing with high definition.
Lead-edge suction feeding system,adjustable air volume,frequency convertor main motor.
Phase electric adjustment by PLC,connection unit locking by pneumatic,electrically control the separation and combination of machine.
Well grinded gear with spray lubrication system,Gears adopt keyless connection.
Chromatically multicolor printing accurately printing effect beautiful.
Easy operation and convenient maintenance,high degree of automation,high effciency production.
Feeder unit
Can be continuous feeding and space feeding.
Inverter control the vacuum air and pressure,to follow the cardboard size.
Can adjust the feeding proceding to reduce the pressure of feeder roller.
Computer control the space of feeder roller and the position of both sides guard.
Backside stacker computer control front and backside,increase the speed of set up.
Electrostatic dust removing device,Multi brush and fan cleaning the wastepaper in surface of the cardboard.To increase the printing quality.
The adjustment of pressure of feeder rollers adopts computer control,between 0-12mm.
The power transmission system adopts cam bearing transmission,in order to reduce the abrasion and make the transmission more steady.
Protector of main motor start(The main motor can not start when the machine didn’t lock well).
Feeder Unit and Printer Unit adopt encoder making zero.
Ordinary carton producing can use making zero automatic device.The correct position can be adjusted by test printing of 2 cardboards. In order to not waste cardboard.
Vacuum Transfer Printing Unit
The printing rollers are rollers are made by high quality steel,hard chrome plating,surface grinding.
Pedal switch control the printing roller turning forward or back off when install the printing sheet.
Adopts vacuum transfer(The surface of the transfer wheel is made by ceramic,in order to increase the rub and using life).Can transfer the cardboard without transfer roller.
The adjustment of the Printing pressure rollers space adopts computer control,between 0-12mm.
Immobilization device of the printing phose. Electrol magnetic clutch brake type brake mechanism.The Brake mechanism to limit gear rotation,Maintain the fixed position of the original gear when the units seperate or adjust the phose and cleaning.
Horizontal phase using computer control,±1Omm.
Automatic reset system after cleaning plate.
Pneumatic single diaphragm pump,Ink supply stability,Operation and maintenance is simple.
Ink tank is placed under the Single blade ink supply system.
Automatic switching cleaning device makes ink recycling more thorough.
Slotter unit
Creaser axis and Slotter axis adopt solid steel,hard chrome plating,surface grinding.
The cardboard is not easy to be broken after creased by the first creaser wheel.
The upper creaser wheel is wrapped with rubber,avoid to damage the cardboard.
The interval of pre-creaser and creaser wheels adopt computerized and digita control.
The interval of slotter shaft adopt motorized control.the adjustment range is 0-12mm
The upper blade tool base and the lower blade tool base adopt the drive shaft linkage,keep the upper and lower blades alignment while moving,and extend the tool life.
Pre-creaser wheel,pre-creaser wheel,creaser wheel and slotter tool base displacement position,adopt computerized and electric digital control.
Collision protect device is adopted for slotter blade height,avoid to damage the machine.
Elastic corner cutting blade structure,can cut 3 layers ans 5 layers cardboard without adjustment,easy operation.
Dryer Unit
Vacuum adsorption roller transfer,roller rows of staggered arrangement,to strengthen the stability of the board transfer.
The air door can be adjusted automatically according to the cardboard different size.
Can make selection of hot air infrared /IR/UV three kinds of drying system based on the configuration.
The drying system adopts PLC program automatic control.
Automatic control of temperature control,fault alarm protection,automatic alarm and fault status display.
Drying system adopts host dual protection control start and close.Completely solve the combustion and
damage problem of the printing products,because of UV/IR lamp direct irradiation too long time when
the machine stop working.
Die cutter Unit
The die roller is made by high quality steel,hard chrome plating,surface grinding.
Balance correction,Increase running stability
The rubber roller is made by high quality steel,hard chrome plating,surface grinding.
Balance correction,Increase running stability
Computer and digit control system are dopted for the space of transfer roller.
Planetary gear structure.
Computer and digit control system are dopted for the die cutting phose,can adjust circle.
Computer and digit control system are dopted for the broadwise phose by±lOmm.
Rubber pad roller compensation adopts servo motor,to control the speed of the rubber roller.Compensation range±3mm.
| 机型Model | TSG-2-920 | TSG-2-1224 | TSG-2-1424 | TSG-2-1628 |
| 机械最高速度（张/分） Max.Machine Speed (pcs/minute) |
220 | 200 | 180 | 150 |
| 最大进纸尺寸 Max.Feeding Size (mm) |
900×2000 | 1200×2400 | 1400×2400 | 1600×2800 |
| 最大隔张送纸尺寸 Jump Feed Max.Cardboard Size(mm) |
1200×2000 | 1500×2400 | 1600×2400 | 1900×2800 |
| 最小进纸尺寸 Min.Cardboard Size(mm) |
300×600 | 365×600 | 400×600 | 450×600 |
| 最大有效印刷面积 Max.Printing Size |
900×1960 | 1200×2360 | 1400×2360 | 1600×2760 |
| 最小开槽间隙（正刀）(mm) Min Slotter Blade Space (Male)(mm) |
150×150×150×150 | 150×150×150×150 | 150×150×150×150 | 150×150×150×150 |
| 最小开槽间隙（反刀） Min Slotter Blade Space (Female)(mm) |
240×65×240×65 | 260×65×260×65 | 260×65×260×65 | 260×65×260×65 |
| 最大开槽深度 Max Slotting Deep(mm) |
250 | 300 | 350 | 400 |
Othter product
English
French
German
Russian
Spanish